Showing posts with label WMS Blog Party. Show all posts
Showing posts with label WMS Blog Party. Show all posts

July 29, 2013

Waltzing Mouse Stamps PJ Party–Classy Lady Card

WMS PAJAMA-PARTY-LOGO

Apparently Waltzing Mouse Stamps wasn’t happy to simply have a plain old blog hop, no sirree! Claire decided to have a PJ party! Wahoo! Sounds like fun to me!

classy lady

The new PJ party has several challenges. Most of them only have prize opportunities if you use new stamps which I don’t own. However, the last one asked you to use any WM stamps to create a background. This I CAN do. I decided to use a sentiment stamp stamped repeated for my background with one stamped in a darker colour as the actual sentiment! Inspired right? OK, not that inspired but still pretty nice. (Its a bit hard to see above to check out the close up below. It shows up way better IRL.)

classy lady bg

I also made this for a challenge on the Joan’s Garden’s Blog for this week which asked us to use a floral patterned paper, a doily and a 3-D flower with greenery as well as the challenge constant which is to use a product sold at Joan’s Gardens. Uh oh. Until I just looked this up, I thought it was any patterned paper! I used music paper except for the tiny paper piecing at the top of the mannequin and you can’t tell it’s floral because its sooo tiny and so light. I hope you trust me Joan! :) I used Distress ink which she sells but that was so easy it almost felt like cheating and although she sells MME paper I couldn’t remember if she sold that particular pack or not. So while I was pretty sure I was already covered, I decided to use Rose Creations dies to make my flower.

classy lady flower

I used vintage music paper and cut the flowers. Then I used pink ink to sponge the petal tips. No need to get fancy, just slap some ink on there, oh, I also used an ink blending tool she sells. Then crunch the petals up into little balls which gives them some texture, uncrunch them and stack onto a brad. Form the innermost flower layer’s petals into a bud shape and glue into place holding it while it dries. Repeat with the next flower layer making a slightly less tight bud shape. Now start pulling the petals up tight towards the bud holding it in your hands as you go working around the flower. When you get to the end, surprisingly, it will hold its shape! Now, with a fine tipped bottle of glue, shoot some glue deep in between the petals to help the flower hold its shape. I hold it for a couple of minutes while it starts to dry or you can tuck it into a small circular container like a toilet paper roll or a small jar.

Enjoy, Rebecca

RECIPE
Stamps:
WMS
Ink: chocolate, berry sorbet-PTI, Antique Linen Distress
Paper: DP-MME, chocolate, vanilla CS-PTI, vintage music paper-stash
Accessories: Foam dots-Jody Morrow, doily-local restaurant rescued from under dessert :) rose creations dies-spellbinders, leaf die-SU!, W00, 01 Copic markers, embossing stylus (veining on leaves), washi tape-Freckled Fawn, Glossy Accents, brad-SU!

May 16, 2013

Hugs, You’ve Been Wonderful!

Waltzing Mouse Stamps is having a blog hop for teachers! We still have at least 5 weeks worth of school here but I like having cards made ahead of time! I’m also entering this in Deconstructing Sketches 101. I know this isn’t so teacher-y but I figure teachers are regular people too and probably get tired of teacher themed stuff. So I only added a subtle nod to a teacher theme with the printing practice lines paper.

WMS blog party logo]

WMS teacher blog hop

While making this I came up with a couple of tips. First, if you want to colour veneer shapes with mists, did you know you can just use the tip or side of the mister straw instead of getting out some sort of applicator or brush? I hate wasting product and even though it’s small, there is always some waste with an applicator. It worked perfectly and was quicker than I thought; I only dipped it in twice. Secondly, never sponge ink into your project with dirty scratch paper behind. You probably already know this but as I usually work with my paper in my hands, this didn’t dawn on me until the navy ink on my scratch paper started making my coral mist look very dirty. Bummer! Embellishment opportunity! Hello sequins!

WMS teacher blog hop2

Last, I needed a colour of red I didn’t have. First I tried second generation stamping, not right. Then a technique I love which is to stamp a strong colour that’s too strong and stamp off, then add another colour of ink to the remaining ink and use the blended ink. While this technique rocks, the result was a bit too pale. I settled for a pure red then regretted it, too bright. I continued making my card but really wasn’t happy. Then I got the fabby idea to overstamp with Antique Linen Distress ink, a deep ivory colour, to darken and remove the brightness. I took a deep breath and prayed that I would be able to line it up, stamped and yeah! Not only did I line it up correctly but the colour was just right, nicely muted but not too dark! So consider these three tricks when you don’t have the right colour ink!

deconstr sketch101

Like my embellishment? I wrapped the butterfly with wire threaded with some cheap crystals. I don’t often use good ones for cards. Here’s how to get the wrap tight without using pliers to twist the wire tight (which will mar the antennae). Fold the wire in half, thread with beads and place over the butterfly. Bring the front wire to the back and the back wire to the front keeping the wires straight. We aren’t going to twist the wires, just keep bring one wire to the front then the other, then one to the back then the other. The trick is to always start with the same wire and consistently work towards the same side otherwise you will twist and untwist the wire never getting anywhere.

Enjoy the hop. Please visit again and feel free to sign up by email subscription if you’d like. I also have RSS feed but I think it’s the kind that’s ending soon so I have to look into getting a new one.

Enjoy, Rebecca

RECIPE
Stamps:
WMS
Ink: real red-SU!, Antique Linen
Paper: kraft, white CS-PTI, DP-carta bella
Accessories: Studio Calico chevron stencil, boss lady, opaque white mists, butterfly veneer, beads, wire-stash, tag die (rotated and die cut twice to remove the tag top), twine-PTI, sequins-fabricland, foam dots-Jody Morrow,

November 18, 2012

Thanks, You’ve Been Wonderful

WMS blog party logo]

This is a triple challenge post. For this month’s WMS blog party and this week’s WMS sketch challenge. And Friday Mashup #85 to make a Project Saying Thank You.

WMS thanks MME amazing

I’m afraid my photography is suffering today from the bright light in my craft room, not bright enough for no lights but bright enough to add a strange colour cast to the lights I do have. Grrr… In addition, I have a cold so I am a bit shaky so the focus is off. bummer. So sorry.

I have a die cutting trick for you. I always hoard my favourite sheets of DP. So I was loathe to cut into another sheet of this paper for the label. But in my mind, nothing else really suited. So I worked out exactly where I would place the final focal tag. Then I traced it. Since the larger mat would cover over the area below, I was free to ‘steal’ it for my label! Cool idea right? I had one small problem in that the card base showed through the holes in my die cut. This is only a problem with this ribbon treatment and not normally an issue. I solved it easily with a snippet of paper in a similar colour from the same pack! The spots are so tiny you definitely cannot tell.

WMSC124

It was awesome to find a paper that already had words in the corners a la the sketch! But not so overwhelming that I couldn’t add my own sentiment as the focal image. My sister and I finally agreed on the style of her wedding favours and this is the ribbon treatment and tag style we are using so I had them in mind when I made the card.

fri mashup 85

(Click the sketches to visit the blog posts.)

The favour is biscotti so they will be individually wrapped in bags intended for pretzels then wrapped in patterned paper. Then the tag will be added in a similar fashion but instead of tying the ribbon the way mine is above, the holes will be punched on the other sides and the ribbon will wrap around the biscotti and paper. The paper will probably have scalloped edges if I can figure out a way to do it that won’t take forever or require multiple punches due to dulling them because of so much use. 200+ favours is a lot! I’ll be sure to show you when I make them.

Thanks for visiting, if you like what you see, be sure you don’t miss anything by subscribing. Subscription thingies for RSS and email are on my sidebar!

Enjoy, Rebecca

RECIPE
Stamps:
sentiment-WMS, music-Skipping Stones Designs
Ink: Berry Sorbet, Chocolate-PTI, Antique Linen, Vintage Photo Distress
Paper: MME Be Amazing, kraft CS-SU!, melon berry CS-PTI
Accessories: pearls-Dollarama, foam dots-Jody Morrow, ribbon-SU!, label dies-PTI, flower-stash,

June 17, 2012

Celebrate–You’re a Star

WMS blog party logo]

I hope my son does well on his report card and if so, this is for him to celebrate the end of the year. This card is also for Unscripted Sketches 163, Joan’s Gardens challenge this week to make a card for a kid and this month’s Waltzing Mouse Blog Party which is open for linking right now!

celebrate WMS blog party june

I kinda got on the confetti craze for this card. I used lots of different papers from 3 packs and Say It Loud from Waltzing Mouse stamps. I wish I’d had one smaller star die so I could layer some even smaller stars pointing off the top right corner, I’ll have to go on a hunt to see which company makes just the right sizes. The photo below is the inspiration for this month’s blog party.

WMJune_Blog_Party

I’m noticing that I really strayed from the sketch quite a bit. I think you can still see the inspiration though, my large panel is bigger, the square was translated into a star and the right panel shrunk into my banner panel. I was still inspired by it though and that’s the point right? I hope…?

un scr sk 163

I hope if you enjoyed my card that you will visit again. I am in the process of making a video for a really cool graduation hat gift box/gift card box and I’ll post the link and measurements as soon as it is done. I have subscription thingies on my sidebar. Have fun with the rest of the party!

Enjoy, Rebecca

RECIPE
Stamps:
WMS
Ink: pumpkin pie, green galore, teal (the last two blended to get the small sentiment colour)-SU!, broken china distress
Paper: Fancy Pants, Echo Park-Splash, MME-Lime Twist, confetti white, kraft CS-SU!, orange zest CS-PTI
Accessories: star dies-Sizzix, PTI, star punch-Fiskars, foam dots- Jody Morrow, notebook page punch-SU!