Nichole challenged us to make an interactive card in honour of their 6th anniversary. We were to be inspired by one of the team’s projects. Seeing Jessica’s fridge magnet with a photo of her son on it made me think of my son whose 12th birthday is today. And I loved how Heather used die cut letters on one of her projects. While we don’t celebrate birthdays, this rather important milestone was on my mind. I guess the inspiration is a rather loose interpretation but still…
So I made this card for him. Inside it has the following words. Energetic Fun Silly Caring Friendly Amazing. I won’t give it to him for a while so it doesn’t seem like a b-day card. It isn’t easy to line up the stamping underneath the tear strip unless you plan ahead so I’ve got a tutorial below showing you how I do it. It isn’t too hard but I have a couple of tips.
The grey keyboard keys are actually off a flexible keyboard. The kind you can roll up. My 5 yo tore it apart so I saved the keys for embellishments! At least something good came of it. The numbers at the bottom are from Boy Basics-Out of this World. I taped off most of the numbers so I count just ink some numbers individually and stamped the additional numbers to create an 11 and a 12.
So here’s how to line up whatever you hide beneath the tear strip.
1. Die cut your tear strip die (aka zipper die) and choose a scrap to use underneath the tear strip. Using a pencil, draw two parallel lines just less than 1\2” apart. Using slightly less than the width of the tear strip will ensure your stamping doesn’t touch the edges of the zipper opening on the finished card since they won’t be smooth and straight. Place the paper with the lines on it under the die cut, line it up with the tear strip and trace the notched end. Slide the paper so your notched pencil line disappears slightly under the die cut. Trace the other side of the die. Again, by making your pencil marks slightly smaller than the die cut opening, you ensure you leave space where the zipper strip attaches in case the recipient doesn’t tear it off completely.
2. Stamp your choice of images or sentiments within the pencil lines. Then erase your pencil lines so you can barely see them. I didn’t trim the notched end now because it makes it hard to line up later.
3. Add Scor-Tape or other strong adhesive to the back of the die cut close to the tear strip. As close as you can place it. Remove the backing except for the small portions shown.
4. Line up the stamped scrap using the faint pencil lines. Make sure no stamping shows from either end and you need to leave enough room to trim your notch.
5. Trim off the straight side flush with the die cut and trim out the notched end while looking at the back. Because you left the backing on close to the notched end, it is easy to get your scissors in. When you are satisfied with the trimming, remove the last bits of backing. You could cut the notched end in advance but it would be hard to line up the scrap. If you wish to cut it ahead of time, I recommend you use a larger scrap and when you draw the lines, mark another where the bottom of the die cut would be so you can use that to line it up. (Next time I’ll be more careful and cut it smoother.)
6. Add more Scor-Tape. You want to be sure that tugging the strip doesn’t pull the die cut off the card! For the top portion, I just used my usual adhesive. Burnish the adhesive well. Apply to your card or project!
I hope this helps you line up your die cuts!
Enjoy, Rebecca
RECIPE
Stamps: tag and words (inside) CTMH, countdown numbers, ink splotches-PTI
Ink: Walnut Stain, Vintage photo Distress, Teal Zeal-Memento, pumpkin pie-SU!
Paper: kraft, natural white, chocolate CS-PTI, DP-MME
Accessories: foam dots-Jody Morrow, stencil letter dies-Sizzix, interactive die-PTI,
Posts
